For the choice of home flooring, most people have done enough homework before the renovation, and laminate wood flooring has the advantages of price loved ones, wear-resistant practicality, high appearance, structural stability, etc., has been loved by everyone. This document, in detail, takes you to understand laminate wood flooring construction technology.

1. Construction process flow of laminate wood flooring.

Site inspection → drawing review → material assignment → cleaning the ground → ground level testing → paving moisture-proof cotton → paving flooring → inspection and acceptance → binding skirting → garbage cleaning → team self-inspection → finished product protection → sub acceptance → completion acceptance.

2. Construction points of laminate wood flooring.

(1) The grass-roots level should be moisture-proof treatment, the moisture-proof layer should be brushed with a waterproof coating or laying plastic film, and moisture-proof matting should be fully paved and level.

(2) Check whether the flatness of the ground, the wall feet straight, verticality, etc., meet the requirements, whether the threshold stone is being paved at a good height is in line with the requirements, whether the ground is dry, firm, construction and other garbage is cleaned up.

(3) Check whether the product is the same as the design drawings, check the label for errors, and assign materials according to the road address on the label.

(4) The ground is clean and full of damp-proof cotton, damp-proof cotton laps are taped together tightly, and the corners are turned up by 50mm.

(5) materials in the field need to be color controlled, the same batch of a color number less than three, and paving should be test-paved before color separation selection to avoid color differences.

(6) laminate wood flooring paving lap using "step high" way.

(7) installation of the first row when the groove surface against the wall, the floor, and the wall should be left between the gap of 10-15mm

(8) when the laminate wood flooring using no keel air paving method should be in the surface layer and the gap between the column and the wall to increase the metal spring card, the spacing should be 200mm ~ 300mm.

(9) When laying composite flooring surface layer in a large area, it should be laid in sections, and when the length or width of the room exceeds 8m, an expansion joint should be set at an appropriate position, and the processing of the segmental joints should meet the design requirements.

(10) After the installation of laminate wood flooring is completed, check whether it is straight, whether there is a loud sound when walking, whether there is undulation, drum phenomenon, whether the width of the expansion joints reserved around the floor meets the requirements.

(11) work after the field is clear, timely removal of garbage, do a good job of finished product protection: full pavement with pit patterned paper, lap interface with sealing adhesive paper paste good.

3. Quality standard of laminate wood flooring.

(1) the surface pattern and color of laminate wood flooring should meet the design requirements, clear pattern, consistent color, and uniform color.

(2) The surface of the laminate wood flooring is flat and clean, with no cracks, no scratches, no warping, no burrs, and the floor cut is neat and straight.

(3) the surface layer of laminate wood flooring is laid firmly flat, with no loose, no undulation, no arch when stepping, no noise when walking, and no ash typography without a size head.

(4) laminate wood flooring panel gaps should be tight, the joint position should be staggered, and the surface should be flat and clean.

(5) laminate wood flooring surface layer using sticky, nailing process, the seam should be flush, sticky, nailing should be dense, the gap width is uniform, the surface is clean, no overflow glue phenomenon.

(6) skirting installation is firm, straight, straight dense with the wall. The interface is straight, tight, and consistent in height, with no burr or skirting, and the laminate wood flooring surface color is consistent or coordinated.

(7) Allowable deviation: the width of the board gap of the laminate wood flooring is 0.5mm, surface flatness is 2mm, skirting top flush is 3mm, board surface stitching straight 3mm, adjacent plate height difference is 0.5mm, skirting and the seam of the surface layer 1mm.

The above is about the construction technology of laminate wood flooring. If you need more detailed information, welcome to contact us!